本设计的设计内容包括建筑设计、结构设计两部分。建筑设计部分，确定了建筑

The design content of this design includes two parts: architectural design and structural design. In the architectural design part, the structural form of the building is determined, the plan, elevation and section of the building are designed, and some layout and construction methods of the building structure and the selection of building materials are considered. In the structural design part, the third frame was mainly designed, and the internal force of the structure under the horizontal load and vertical load were obtained by the D value method and the secondary distribution method of bending moment, respectively. Because the proposed site is fortified at 6 degrees, the earthquake action is not calculated, only the load effect combination under enduring conditions is selected, the most unfavorable internal force of the cross section is selected to calculate the reinforcement of the beam and column, and finally the slab, stairs and foundation are designed .

The design of this design includes architectural design and structural design. The architectural design part determines the structure form of the building, designs the plane, facade and section of the building, and considers some layout and construction practices of the building structure and the selection of building materials. The structural design part, mainly for the design of the 3rd frame, uses the D-value method and the bending moment secondary distribution method to find the structural internal force under the action of horizontal load and vertical load respectively. Because the proposed site is 6 degrees fortification, so the seismic effect is not calculated, only the load effect combination under the long-lasting condition, select the most adverse internal force of the cross-section for the column, column banding calculation, and finally the board, staircase, foundation designed.

The design includes two parts: Architectural Design and structural design. In the part of architectural design, the structural form of the building is determined, the plane, elevation and section of the building are designed, and some layout and construction methods of the building structure and the selection of building materials are considered. In the structural design part, the third frame is designed, and the internal forces of the structure under the horizontal and vertical loads are calculated by the D-value method and the second moment distribution method. Because the proposed site is 6 degree fortification, the seismic action is not calculated, only the load effect combination under the permanent condition is carried out, the most unfavorable internal force of the section is selected for the reinforcement calculation of beams and columns, and finally the slab, stairs and foundation are designed.