6.8材料、准成品及成品重叠存放高度规定：6.8.1材料重叠存放高度：

6.8 materials, finished products and finished quasi-overlapping predetermined stock height: <br>6.8.1 storage material overlap height: <br>6.8.1.1 needle guide box overlapping layer deposited not more than 6; large cardboard aluminum foil (width 60CM length X48CM X52CM high) stack installed not exceed 4 layer, a wooden box (width 60CM length X45CM X50CM high) mounted overlapping layer height not exceeding 3, an aluminum foil small box (width 60CM length X30CM high X30CM) shall not exceed 5 overlapping storage layer. <br>6.8.1.2 foil tub temporary storage zone can not overlap more than two, and when the plastic buckets overlap, the height of the lower plastic barrel of aluminum foil can not exceed the height of the pillar frame height shall not exceed 30CM, Poly to the uppermost cut-foil packaging is not beyond styrofoam height. <br>6.8.1.3 uppermost discharge lighter materials, such as tape, not more than 4 electrolytic paper layer (layer containing 4), heavier material such as aluminum foil layer is not more than 3. <br>6.8.1.4 aluminum carton height ≤28CM time release layer 6, by placing the actual storage layer 5, ≤30CM≤35CM time release layer 5, layer 4 by placing the actual storage; Jiaogai limited release layer 5, the actual storage press 4 placed layer; shelf when stratified, based on aluminum, and plastic cover layers placed determine the actual height of the carton (the actual display does not exceed the total number of layers), placing the top layer. <br>6.8.1.5 aluminum (AL), CP wire material directly stacked no more than 4 barrels / boxes, pallets stacked no more than 2 plate. <br>6.8.1.6 direct material transport height of not more than 1.5 meters

6.8 The overlapping storage height of materials, quasi-finished products and finished products is specified:<br>6.8.1 Material overlapping storage height: 6.8.1.1 The stacking of the needle box should not exceed 6 layers, aluminum foil large cartons (60CM long X48CM width X52CM high) should not be stacked more than 4 layers, large wooden box (60CM long X45CM width X50CM high) should not exceed 3 layers of overlap height, aluminum foil small box (60CM long X30CM)<br>Wide X30CM high) overlapping storage must not exceed 5 layers.<br>6.8.1.2 The aluminum foil barrel overlap storage in the staging area shall not exceed two layers, and when the barrels overlap, the height of the aluminum foil in the lower plastic drum shall not exceed the height of the strut frame aluminum foil shall not exceed 30CM, and the cut aluminum foil at the top of the Polylong packaging shall not exceed the height of Poly dragon.<br>6.8.1.3 The upper most layer of lighter materials, such as tape, electrolytic paper, etc. must not exceed 4 layers (including 4 layers), aluminum foil and other heavier materials not more than 3 layers. 6.8.1.4 aluminum shell carton height of 28CM time limit put 6 layers, the actual storage according to 5 layers, the actual storage of the time limit of 5 layers, the actual storage according to 4 layers;<br>The height of the plastic lid carton determines the actual number of placement layers (not exceeding the specified total number of actual placement layers), the top layer is placed one layer.<br>6.8.1.5 Aluminum line (AL), CP line raw materials directly stacked no more than 4 barrels / case, stack stack stack no more than 2 boards. 6.8.1.6 Material direct transport height not exceeding 1.5 m

6.8 regulations on overlapping storage height of materials, quasi-finished products and finished products:<br>6.8.1 overlapping storage height of materials:<br>6.8.1.1 the overlapping storage of needle guide boxes shall not exceed 6 layers; the stacking of large aluminum foil cartons (60cm long x 48CM wide x 52cm high) shall not exceed 4 layers, the stacking height of large wooden boxes (60cm long x 45cm wide x 50cm high) shall not exceed 3 layers, and the overlapping storage of small aluminum foil boxes (60cm long x 30cm wide x 30cm high) shall not exceed 5 layers.<br>6.8.1.2 the overlapped storage of aluminum foil buckets in the temporary storage area shall not exceed two layers, and when the glue buckets overlap, the height of aluminum foil in the lower glue bucket shall not exceed the height of the support frame, and the height of aluminum foil shall not exceed 30cm, and the cut aluminum foil on the top layer of PolyOne packaging shall not exceed the height of PolyOne.<br>6.8.1.3 the lightest materials, such as tape and electrolytic paper, shall not exceed 4 layers (including 4 layers), and the heaviest materials, such as aluminum foil, shall not exceed 3 layers.<br>6.8.1.4 aluminum case cartons shall be placed in 6 layers within the time limit of ≤ 28cm, 5 layers within the time limit of ≤ 30cm ≤ 35cm, and 4 layers within the time limit of actual storage; rubber cover shall be placed in 5 layers within the time limit, and 4 layers within the time limit of actual storage; when shelves are layered, the actual number of layers shall be determined according to the height of aluminum case and rubber cover cartons (not exceeding the total number of layers specified), and the top layer shall be placed.<br>6.8.1.5 the raw materials of aluminum wire (AL) and CP wire shall not be stacked more than 4 barrels / box directly, and the stacking of pallets shall not be more than 2.<br>6.8.1.6 the direct transportation height of materials shall not exceed 1.5m.<br>