剪切厚度剪板机剪切厚度主要受剪板机构件强度的限制。但其最终取决于剪切力

Thickness shear <br>shears the shear member thickness is limited primarily by the strength of the shears. But ultimately it depends on a shearing force. <br>Many factors affect the shear force. For example: edge gap, edge sharpness, the size of the angle of shear, shear rate, shear temperature and so the width of the shear plane. The most important thing is the shear strength of the material. Currently, multi-thickness shears shear of 32 mm or less. If the thickness is too large, the utilization rate of equipment and economic point of view is not desirable.

In addition to level 3, using ysin anisan method ing ed yselysed to singlet ...

Shear thickness<br>The shear thickness of plate shears is mainly limited by the strength of plate shears. But it ultimately depends on the shear force.<br>There are many factors that affect the shear force. For example: edge clearance, edge sharpness, shear angle size, shear speed, shear temperature, shear surface width, etc. The most important is the strength of the material being cut. At present, the shearing thickness of plate shears is mostly less than 32mm. If the thickness is too large, it is not desirable in terms of the utilization rate and economy of the equipment.<br>