3.2.5.2.2卸载运行5分钟后停车，检查油位，管道有无泄漏现象。3

3.2.5.2.2 After unloading and running for 5 minutes, stop, check the oil level and see if there is any leakage in the pipeline. <br>3.2.5.2.3 Restart, load operation, and determine the pressure difference value. <br>Check the oil temperature, the air temperature after the first and second cooling. <br>3.2.5.3 Quality standards (gas storage tanks and oil-gas separators)

3.2. 5.2. 2 stop the machine after 5 minutes of unloading operation to check the oil level and whether there is leakage in the pipeline.<br>3.2. 5.2. 3 restart, operate under load and determine the differential pressure.<br>Check the oil temperature and the air temperature after primary and secondary cooling.<br>3.2. 5.3 quality standard (air storage tank and oil-gas separator)

3.2.5.2.2 Stop after unloading for 5 minutes, and check the oil level and pipeline for leakage. 3.2.5.2.3 Restart, load operation, and determine the pressure difference. Check the oil temperature and air temperature after primary and secondary cooling. 3.2.5.3 quality standard (gas tank and oil-gas separator)