使用前应检查离合器间隙是否正确，尽管离合器在出厂前已调整好。 注意：参

Before using should check the clutch gap is correct, although the clutch adjusted at the factory good. Note: See Table a correlation value. By engaging, disengaging the clutch to measure the movement distance of the platen to check. If the gap is incorrect, by increasing or decreasing the solid

Check that the clutch clearance is correct before use, although the clutch has been adjusted before leaving the factory. Note: See the relevant values in Table 1. Check by engaging and disengaging the clutch to measure the movement distance of the pressure disc. If the clearance is incorrect, the

Check whether the clutch clearance is correct before use, although the clutch has been adjusted before delivery Note: refer to the relevant values in Table 1 Check by measuring the moving distance of the pressure plate by engaging and disengaging the clutch. If the gap is not correct, it should be fixed by increasing or decreasing<br>