7） 对新产品的基本构思和采用先进技术的设想及目前现有系统存在的问题：

7) of the basic idea of the new and existing products and vision problems currently existing systems using advanced technology: <br>8) first test of new products and key technical issues and risk analysis; <br>9) development of new products approximately schedule; <br>10) New Products the annual output is expected, cost estimating, budget price: <br>11) investment budget (including: investing in people, facilities / equipment investment, etc.) <br>12) sales channels and other cases: <br>13) the voice of the customer into measurable design objectives, contain costs goals, quality objectives, process capability goals, productivity targets. <br>14) assessment findings. ( "New Project Feasibility Report") <br>6.1.5 functional team detailed arrangements for new product development progress. ( "Project APQP new product development plan") <br>6.1.6 to develop the initial bill of materials needed to manufacture products based on product / process on. ( "Initial bill of materials"); <br>6.1.7 to determine the initial process flow diagrams based on the initial bill of materials and ideas to customers of the product / process. ( "Initial Process Flow Diagram '' Process Flow Diagram Checklist"); <br>6.1.8 according to the special nature of customer specified products and processes as well as past experience in product development, the preparation of special product and process characteristics list. Identify specific characteristics may be identified from the following aspects: 1) the safety, environmental requirements, 2) performance, structural requirements, 3) material properties in claim 4) dimensional tolerance, 5) fine appearance, 6) packaging, transportation and the like. <br>At this stage, the group should ensure that the initial list of special product and process characteristics through the analysis of customer input about the needs and expectations of being drawn. The development of this list based on (but not limited to) the following: 1) analysis of based on customer needs and expectations of product vision; determining 2) reliability goals / requirements; 3) identify specific process characteristics expected from the manufacturing process; 4) analysis of similar parts of failure mode and effects. <br>Where: Key Features: beyond the prescribed limits cause is one which causes product safety, regulatory compliance, or loss of product fully functional.<br>Important characteristics: the product beyond the prescribed limits cause functional decline, secondary effects: Even beyond the prescribed limits, a slight effect on product performance. ( "Product and process a list of special characteristics")

7) The basic idea of new products and the idea of using advanced technology and the problems with the current system:<br>8) New product piloting and key technical issues and risk analysis;<br>9) The general schedule of new product development;<br>10) Estimated annual output, cost estimates, and price budgets for new products:<br>11) Investment budget (including: personnel investment, facilities/equipment investment, etc.)<br>12) Sales channels and more:<br>13) Turn customer voices into measurable design goals, including cost goals, quality goals, process capability goals, and productivity goals. 14) Assessment findings.<br>(New Product Project Feasibility Report) 6.1.5 The multi-functional team details the progress of new product development.<br>(APQP Development Plan for New Product Projects) 6.1.6 Develop the initial bill of materials required to manufacture the product on the basis of the product/process. <br>(Initial List of Materials); 6.1.7 The initial process flowchart is determined based on the initial bill of materials and the assumption of the customer's product/process.<br>(Initial Process Flow Chart, Process Flow Chart Checklist); 6.1.8 Prepare a list of product and process-specific characteristics based on the particularity of the products and processes specified by the customer and the experience of past product development.<br>Identification of special features can be identified from the following aspects: 1) safety, environmental protection requirements, 2) performance, structural requirements, 3) material performance requirements, 4) dimensional tolerances, 5) appearance, 6) packaging, transportation, etc. At this stage, the team should ensure that an initial schedule of the characteristics of the special product and process derived from the analysis of the inputs related to the customer's needs and expectations is developed. <br>The schedule is based on( but not limited to) product assumptions based on customer needs and expectations analysis, 2) reliability objectives/requirements, 3) specific process characteristics from the expected manufacturing process, and 4) failure patterns and consequence analysis of similar parts.<br>Among them: Key features: exceeding the prescribed limits caused by the product's safety, regulatory compliance, or product loss of full functionality. Important features: Exceeding the specified limits causes the product to lose functionality, with secondary effects: a slight impact on product performance, even if the specified limits are exceeded. (List of Special Features of Products and Processes)

7) basic conception of new products, assumption of adopting advanced technology and existing problems of current system:<br>8) advanced test of new products, key technical problems and risk analysis;<br>9) general schedule of new product development;<br>10) estimated annual output, cost estimation and price budget of new products:<br>11) investment budget (including investment in personnel, facilities / equipment, etc.)<br>12) sales channels and other information:<br>13) convert customer voice into measurable design objectives, including cost objectives, quality objectives, process capability objectives and productivity objectives.<br>14) evaluation conclusion. (new product project feasibility report)<br>6.1.5 the multi-functional team shall make detailed arrangement for the development progress of new products. (APQP development plan for new product projects)<br>6.1.6 establish the initial BOM required for manufacturing products on the basis of products / processes. (initial material list);<br>6.1.7 determine the initial process flow chart according to the initial BOM and the customer's product / process assumptions. (initial process flow chart and process flow chart checklist);<br>6.1.8 according to the particularity of products and processes designated by customers and previous product development experience, prepare the list of special characteristics of products and processes. Special characteristics can be identified from the following aspects: 1) safety and environmental protection requirements, 2) performance and structure requirements, 3) material performance requirements, 4) dimensional tolerance, 5) appearance, 6) packaging, transportation, etc.<br>At this stage, the team shall ensure to develop an initial list of special product and process characteristics through the analysis of input related to customer needs and expectations. The formulation of this schedule is based on (but not limited to) the following aspects: 1) product assumption based on customer needs and expectation analysis; 2) determination of reliability objectives / requirements; 3) determination of special process characteristics from the expected manufacturing process; 4) failure mode and consequence analysis of similar parts.<br>Among them: key characteristics: caused by exceeding the specified limit refers to the safety, regulatory compliance of the product, or the loss of full function of the product.<br>Important characteristics: exceeding the specified limits causes the product function to decline, and the secondary impact: even if exceeding the specified limits, it has a slight impact on the product performance. (list of special characteristics of products and processes)<br>