(1)故障控制存在风险；1、日常保养和点检报表2、机台加装感应、报警系

(1) a control failure risk; <br>1, daily maintenance and inspection report <br>2, installation of the induction machine, an alarm system (FIG. 5) <br>(2) controlling each machine SPC; <br>1, cutting speed, tension, SPC Winds report <br>(3) equipment and tools do not correspond, how to determine the factors? <br>1, A type cutters abutting A class corresponds machines, class B tool docking class B corresponds machines, class C tool butt class C corresponding to the machine (Fig. 1 ) <br>2, the ERP control system (FIG. 2) <br>3, a scan tool (FIG. 3)

(1) There is a risk of fault control;<br>1, daily maintenance and inspection reports<br>2, machine installation induction, alarm system (Figure 5)<br>(2) SPC control for each machine;<br>1, cutting speed, tension, wind speed SPC report <br>(3) The equipment and the tool do not correspond, how to determine the influencing factors?<br>1, Class A tool docking Class A corresponding machine, B-type tool docking B-class corresponding machine, Class C tool docking C corresponding machine (Figure 1)<br>2, ERP system control (Figure 2)<br>3, tool scan (Figure 3)

(1) Risk of failure control;<br>1. Daily maintenance and spot check report<br>2. The machine is equipped with induction and alarm system (Figure 5)<br>(2) SPC control for each machine;<br>1. SPC report of cutting speed, tension and wind speed<br>(3) There is no corresponding relationship between equipment and tool. How to determine the influencing factors?<br>1. A tool docking a corresponding machine, B tool docking B corresponding machine, C tool docking C corresponding machine (Figure 1)<br>2. ERP system control (Figure 2)<br>3. Tool scanning (Figure 3)