启动发动机之后，仪表板的制动系统警告灯闪亮，车辆行驶时ABS故障警告灯

After starting the engine, the warning light of the brake system of the instrument panel flashes, the ABS failure warning light and the ASR warning light are intermittently lit when the vehicle is running, the instrument panel emits an alarm sound, and the LCD display shows the brake failure information. <br>Fault diagnosis and maintenance: regular inspection of the brake system, the brake fluid capacity is normal, and the brake pads are not excessively worn. Use the diagnostic instrument to self-diagnose the ABS system, and the result has a fault code 01203, which is that the electrical connection of the ABS instrument panel is open or short-circuited to ground. Consult relevant information. The causes of failure include: short circuit or disconnection of the No. 10 terminal wire of the instrument panel and the ABS control module to the ground, an internal failure of the instrument panel, and a short circuit of the No. 10 terminal wire of the instrument panel and the ABS control module and the positive electrode. Self-diagnosis of the dashboard, the result is no fault code. After clearing the fault code of the ABS system and carrying out a test run, the fault reappeared quickly. Check the time line between the No. 10 terminal of the ABS control module and the T32a11 terminal of the instrument panel. The result is normal.

启动发动机之后，仪表板的制动系统警告灯闪亮，车辆行驶时ABS故障警告灯和ASR警告灯间歇点亮，仪表板发出报警声，同时液晶显示屏显示制动故障信息。<br>故障诊断与检修：对制动系统进行常规检查，制动液容量正常，制动摩擦片没有过度磨损。使用诊断仪对ABS系统进行自诊断，结果有一个故障码01203，内容为ABS仪表板电气连接断路或对地短路。查阅相关资料，故障原因包括：仪表板与ABS控制模块的10号端子导线对地短路或断路、仪表板内部故障、仪表板与ABS控制模块的10号端子导线与对正极短路。对仪表板进行自诊断，结果没有故障码。清除掉ABS系统的故障码，进行试车，故障很快再次出现。检查ABS控制模块的10号端子与仪表板的T32a11端子时间的线路，结果正常。

After starting the engine, the brake system warning light in the instrument panel will flash, the ABS fault warning light and ASR warning light will be on intermittently when the vehicle is driving, the instrument panel will send out an alarm sound, and the LCD will display the brake fault information.<br>Fault diagnosis and maintenance: carry out routine inspection on the brake system, the brake fluid capacity is normal, and the brake friction plate is not excessively worn. Use the diagnostic instrument to self diagnose the ABS system. As a result, there is a fault code 01203, which contains the open circuit or short circuit to ground of the ABS instrument panel electrical connection. Refer to relevant data, the causes of the fault include: short circuit to ground or open circuit of terminal 10 wire of instrument panel and ABS control module, internal fault of instrument panel, short circuit of terminal 10 wire of instrument panel and ABS control module and positive circuit. Self diagnosis of the instrument panel results in no fault code. Clear the fault code of ABS system, conduct test run, and the fault will appear again soon. Check the circuit between terminal 10 of ABS control module and terminal t32a11 of instrument panel, and the result is normal.<br>