1. 标签贴付注意事项：标签贴付平整，无破损、褶皱、不清晰的现象，不能

1. Precautions for label attaching: The label attaching is flat, without damage, wrinkles, or illegibility. It cannot be attached to the exposed copper of the motherboard, and attached to the blank area of ​​the PCB board at the position in Figure 2. <br>2. When attaching the label, be careful not to touch the shrapnel on the motherboard, which will cause the shrapnel to deform, as shown in Figure 2.

1. Label pay note: label pay flat, no breakage, folds, unclear phenomenon, can not be attached to the main board exposed copper, paste in figure 2 position PCB board blank area.<br>2. When labeling, be careful not to touch the shrapnboard on the motherboard, resulting in shrapn ups and downs, as shown in Figure 2.

1. Notes for label placement: the label should be flat without damage, fold and unclear. It should not be attached to the exposed copper of the main board. It should be pasted in the blank area of PCB board in Figure 2.<br>2. When the label is attached, pay attention not to touch the shrapnel on the motherboard, resulting in deformation of the shrapnel, as shown in Figure 2.<br>