一拖二口罩机技术参数主要功能:该设备生产线主要由本体机、翻片输送线及两

The main function of the technical parameters of the one drag two mask machine: <br>the equipment production line is mainly composed of the body machine, the flap conveying line and two ear strap welding machines. After the body machine outputs the mask body, the mask body sheet is transported to the turning mechanism by the conveyor belt structure. Flip the mask disk onto the conveyor belt connected to the ear belt machine through the turning mechanism, and then transport the mask sheet to the front of the ear belt machine through the conveyor belt * above the mask disk, * place the mask sheet on the ear belt machine by pressing down the cylinder the mask plate, subsequent completion of the ear with a machine mask ear band welded, thereby completing the production of a flat outer ear with a mask products, automatic line layout below, the entire line is a drag two structural <br>main features: <br>good welding effect, low failure rate ; <br>High-efficiency production speed, up to 90-120 pieces per minute, continuous production for 24 hours; <br>computer PLC programming control, servo drive, high degree of automation; <br>photoelectric detection of raw materials, avoid errors and reduce waste; <br>friendly man-machine interface, abnormal equipment And alarm for lack of material, the screen guides to quickly handle exceptions. <br>Equipment list <br>mask body production machine; 2, mask line turning machine; 3, mask ear strap welding machine <br>technical specifications: 1, working power supply 220V, AC ± 5%, 50HZ; the <br>whole line equipment power is about 8.8KW; <br>compressed air 0.5 ~ 0.8MPa, flow rate after primary drying and filtration: about 400L / Min. <br>V. <br>Operating environment temperature: 0 ~ 40 ℃ Humidity: 5 ~ 38% HR No flammable gas, corrosive gas workshop dust-free (not less than 10 10,000 class) <br>The power of the whole line equipment is about 8.8KW; the <br>production efficiency is 90 ~ 110 pieces / minute (one-to-two layout). The <br>external dimensions of the equipment are about 6800mm * 4800mm * 1990mm. <br>Pneumatic components: SMC or AIRTAC, etc .; <br>Servo system: Hechuan or Xinjie Wait;<br>Mitsubishi or Xinjie, etc .; <br>human-machine interface: PLC programmable controller WeinView or Xinjie; <br>sensors: Omron, Panasonic, etc .; <br>frequency converters; Xinjie, Funet , etc .; <br>ultrasonic components: 20KHZ (or 15KHZ); <br>forming mold: Refer to the industry standard of disposable outer ear masks as standard;

One drag two mask machine technical parameters main functions:<br>The production line of this equipment is mainly composed of body machine, flip conveyor line and two earband welding machines. After the body machine outputs the mask body, the body of the mask body is transported by the conveyor belt structure to the flip mechanism. By flipping the mechanism to flip the mask plate to the conveyor belt connecting the earband machine, and then through the conveyor belt to the front of the earband machine, the mask plate is placed in the mask plate of the earband machine by the cylinder pressure, and subsequently the earband machine completes the earband melting of the mask, thus completing the production of a flat outer earband mask product, automatic line layout is as follows, the whole line is a drag structure<br>Key features:<br>Welding effect is good, failure rate is low;<br>High production speed, up to 90-120 tablets per minute, continuous production of 24 hours;<br>Computer PLC programming control, servo-driven, high degree of automation;<br>Photoelectric detection of raw materials, to avoid mistakes, reduce waste;<br>Human-machine interface friendly, equipment anomalies and missing information alarm, screen guidance to quickly deal with anomalies.<br>List of devices<br>Mask body production machine; 2, mask wire reel machine; 3, mask earband welding machine<br>Specifications: 1, operating power supply 220V, AC 5%, 50HZ;<br>Full-line equipment power approx. 8.8KW;<br>Compressed air 0.5 to 0.8MPa, primary drying, filtered flow: approx. 400L/Min<br>V. Use environment<br>Operating temperature: 0 to 40 degrees C Humidity: 5 to 38% HR non-flammable gas, corrosive gas workshop dust-free (not less than 100,000 levels)<br>Full-line equipment power approx. 8.8KW;<br>Productivity 90 to 110 pieces per minute (one drag two layout)<br>The device form factor is approx. 6800mm x 4800mm x 1990mm<br>Pneumatic components: SMC or AIRTAC, etc.;<br>Servo system: Yukawa or Xinjie, etc.<br>Mitsubishi or Sinjet, etc.<br>Human-machine interface: PLC programmable controller WeinView or Sinjet, etc.<br>Sensors: Omron, Panasonic, etc.;<br>inverters;<br>Ultrasonic components: 20KHZ (or 15KHZ);<br>Molded mold: standard factory reference disposable outer ear mask industry standard;

Main functions of technical parameters of one drag two mask machine:<br>The production line of the equipment is mainly composed of body machine, flap conveyor line and two ear belt welding machines. After the body machine outputs the mask body, the conveyor belt structure transmits the mask body piece to the turning mechanism. Turn the mask plate to the conveyor belt connecting the ear belt conveyor through the turning mechanism, and then deliver the mask plate to the front * of the ear belt conveyor through the conveyor belt, * place the mask plate into the mask plate of the ear belt conveyor through the air cylinder, and then the ear belt fusion of the mask is completed by the ear belt conveyor, so as to complete the production of a flat outer ear belt mask product. The automatic line layout is as follows , the whole line is of one pull two structure<br>Main features:<br>Good welding effect and low failure rate;<br>The production speed is high efficiency, which can reach 90-120 pieces per minute, and can be produced continuously for 24 hours;<br>PLC programming control, servo drive, high degree of automation;<br>Photoelectric detection of raw materials to avoid mistakes and reduce waste;<br>Friendly human-machine interface, equipment abnormal and material shortage alarm, screen guidance to deal with abnormal quickly.<br>Equipment list<br>Mask body production machine; 2. Mask wiring Flap machine; 3. Mask ear belt welding machine<br>Technical specifications: 1. Working power: 220V, AC ± 5%, 50Hz;<br>The power of the whole line equipment is about 8.8kw;<br>Compressed air 0.5 ~ 0.8MPa, flow rate after primary drying and filtration: About 400L / min<br>5、 Use environment<br>Working temperature: 0 ~ 40 ℃, humidity: 5 ~ 38% HR, no combustible gas, no dust in corrosive gas workshop (no less than 100000)<br>The power of the whole line equipment is about 8.8kw;<br>Production efficiency 90-110 pieces / min (one for two layout)<br>Overall dimension of equipment is about 6800mm * 4800mm * 1990mm<br>Pneumatic components: SMC or AIRTAC, etc;<br>Servo system: Hechuan or Xinjie, etc;<br>Mitsubishi or Xinjie, etc;<br>Human machine interface: PLC programmable controller weinview or Xinjie, etc;<br>Sensor: Omron, Panasonic, etc;<br>Frequency converter; Xinjie, Futong, etc;<br>Ultrasonic component: 20kHz (or 15KHz);<br>Molding mold: standard factory reference disposable external ear mask industry standard;