远程手动进线电源2开关至进线电源1：通过设备面板将模式设置为“远方”模

Remote manual incoming power supply 2 switch to incoming power supply 1: Set the mode to "remote" mode through the device panel, reset the device, and confirm that the incoming power supply 1 indicator is on, the incoming power supply 2 indicator is on, and the equipment operation indicator is on; short circuit For manual switch contacts, the device should first turn off the 1DL switch, and then turn on the 2DL switch after a delay. The measurement outlet and signal should be correct, and the action time should be correct. ;

Remote manual in-line power supply 2 switch to in-line power supply 1: through the device panel to set the mode to "far" mode, reset the device, confirm the input power supply 1 LED on, in-line power supply 2 light on, device operation light on;

Remote manual incoming power supply 2 switch to incoming power supply 1: set the mode to "remote" mode through the equipment panel, reset the equipment, confirm that the incoming power supply 1 indicator light is on, the incoming power supply 2 indicator light is on, and the equipment operation indicator light is on; short circuit the manual switch contact, the equipment should first turn off 1dl switch, and then turn on 2DL switch after delay, the measurement outlet and signal should be correct, and the action time should be correct . ;<br>