产品性能的要求为：1、产品不脱落、不掉粉或轻微掉粉；2、固体含量控制在

The requirements of product performance are: 1. The product does not fall off, does not drop powder or slightly loses powder; 2. The solid content is controlled between 75%-85%; 3. The fineness requirement is ≤23 μm; 4. The viscosity is controlled at room temperature 10-80pa·s; 5. EL requires no blackening on the edge and the middle, no wire breakage, no pitting; 6. The contact resistance is between 500-900mΩ.

The requirements for product performance are as follows: 1. The product does not fall off, powder or slight powder; 2. The solid content shall be controlled between 75% - 85%; 3. Fineness requirement ≤ 23 μ m； 4. The viscosity is controlled at 10-80 PA · s at room temperature; 5. El requires that there is no blackening at the edge and middle, and there is no broken line and pockmarks as a whole; 6. The contact resistance is between 500-900m Ω.

The product performance requirements are as follows: 1. The product does not fall off, powder or slightly powder; 2. The solid content is controlled between 75% and 85%; 3. Fineness requirement ≤ 23μ m; 4. The viscosity is controlled at 10-80 Pa s at normal temperature; 5. EL requires no blackening at the edges and middle, no broken wires and no pitting on the whole; 6. The contact resistance is between 500 and 900 mω.