车间所用的吸塑包装机泡罩成型总共由五个参数组成：成型上模温度、预热时间

The blister molding of the blister packaging machine used in the workshop consists of five parameters in total: molding upper mold temperature, preheating time, molding lower mold temperature, vacuum time and blowing time. Among them, the lower film temperature and preheating time act on the blister preforming mold, while the upper film temperature, vacuum time and blowing time act on the final blister forming mold. When the blister is formed, the lower film is pre-formed in the pre-forming mold, and then the blister is formed at the final molding die. Therefore, the pre-forming and final forming effects of the blister should be examined separately during verification.

The blistering packaging machine bubble cover molding used in the workshop consists of a total of five parameters: molding upper mold temperature, warm-up time, molding molding temperature, vacuum time and blowing time. Where the molding of the lower membrane temperature and warm-up time act on the bubble cover pre-molded mold, forming the upper membrane temperature, vacuum time and blowing time act on the bubble cover final molding mold. When the bubble cover is molded, the lower membrane first completes the pre-molding in the pre-molded mold, and then completes the bubble molding at the final molding mold, so the pre-forming and final molding effect of the bubble cover need to be examined separately when verifying. ...

It consists of five parts: the time of pre heating and the temperature of the vacuum molding machine, and the molding temperature. The lower film temperature and preheating time act on the preform mold of the blister, while the upper film temperature, vacuum time and blowing time act on the final forming mold of the blister. When the blister is formed, the lower film is preformed in the preform mold, and then the blister is formed at the final molding mold. Therefore, it is necessary to investigate the pre forming and final forming effects of the blister respectively during the verification.<br>